42 lines
2.7 KiB
Markdown
42 lines
2.7 KiB
Markdown
# Implementation Plan
|
|
|
|
## Implemented
|
|
|
|
- Repo-local persistence machinery.
|
|
- First architecture map.
|
|
- Example config for one video source plus two audio sources.
|
|
- Sender device discovery script.
|
|
- Sender launch script with dry-run mode and per-source FFmpeg commands.
|
|
- OBS receiver setup notes.
|
|
- Neighbor sender deployment under `C:\Meta\LocalCastBridge`.
|
|
- Madman's desktop start/stop launchers for the sender.
|
|
- Receiver OBS scene has `Neighbor PC - Video` and `Neighbor PC - Focusrite` Media Sources.
|
|
- Voicemeeter loopback installed on the sender.
|
|
- Receiver OBS scene has `Neighbor PC - System Audio` on SRT port `5102`.
|
|
- Sender script uses `-nostdin` and repo-root logs so desktop launchers stay alive and diagnostics land in `C:\Meta\LocalCastBridge\logs`.
|
|
- Sender video config is `1920x1080` for the interactive desktop. The `1024x768` SSH session size is not the streaming target.
|
|
- Desktop `.cmd` launchers delegate to PowerShell wrappers so paths with spaces and apostrophes are handled in one place.
|
|
- Audio-field sidecar profile and tool:
|
|
- `config/audio-field.example.json` declares six mic channels, two speaker channels, placeholder geometry, calibration sweep settings, and FOA AmbiX ACN/SN3D output.
|
|
- `scripts/audio_field.py` lists devices, validates the profile, generates calibration sweeps, records speaker-to-mic calibration returns, analyzes delay/gain/polarity, records raw six-channel fields, and encodes offline WAVs to FOA.
|
|
- `docs/audio-field.md` maps the audio pipeline and its invariants.
|
|
|
|
## Temporary
|
|
|
|
- Audio and video are separate SRT endpoints. This preserves OBS mixing authority but may need latency tuning.
|
|
- Audio defaults to AAC inside MPEG-TS for compatibility; test Opus later only if there is a concrete reason.
|
|
- Desktop capture uses `gdigrab` first because it is broadly available. `ddagrab` is a candidate once the installed FFmpeg build is confirmed.
|
|
- The scripts assume Windows sender and OBS receiver on the same LAN.
|
|
|
|
## Next
|
|
|
|
1. Open OBS and confirm the three `Neighbor PC` sources load.
|
|
2. Start the sender from Madman's interactive desktop, not SSH.
|
|
3. Smoke-test the video endpoint in OBS.
|
|
4. Smoke-test the Focusrite endpoint in OBS.
|
|
5. Smoke-test the system-loopback endpoint in OBS.
|
|
6. Tune SRT latency and FFmpeg buffering for the local network.
|
|
7. Decide whether a small OBS scene/source generator is worth adding.
|
|
8. Reconsider plugin/fork only if standard OBS Media Source cannot preserve the required behavior.
|
|
9. Create local `config/audio-field.json`, confirm whether one device exposes six synchronized mic inputs, and replace placeholder mic/speaker geometry with measured world coordinates.
|
|
10. Run audio speaker sweeps, copy measured delay/gain/polarity into the profile, then encode a first FOA AmbiX test WAV.
|