// SPDX-FileCopyrightText: 2025 Erin Catto // SPDX-License-Identifier: MIT #include "test_macros.h" #include "box3d/box3d.h" #include "box3d/collision.h" // The per-body query functions take an explicit world origin and a world body transform. // Everything is re-centered on the origin so the float collision math stays accurate far from // the world origin. These tests pin that framing: results come back in world space, the supplied // transform drives the geometry (not the body's stored pose), and a large origin offset must not // change a hit fraction or normal. // // CastRay and CastShape never touch the body's stored transform, so a static body at the origin // holding local-frame shapes is enough. No step is needed for any query. static b3WorldId CreateQueryWorld( b3BodyId* bodyId ) { b3WorldDef worldDef = b3DefaultWorldDef(); b3WorldId worldId = b3CreateWorld( &worldDef ); b3BodyDef bodyDef = b3DefaultBodyDef(); *bodyId = b3CreateBody( worldId, &bodyDef ); return worldId; } static b3WorldTransform IdentityAt( float x, float y, float z ) { return (b3WorldTransform){ .p = (b3Pos){ x, y, z }, .q = b3Quat_identity }; } // CastRay ---------------------------------------------------------------------------------- static int CastRayHitsSphere( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3Sphere sphere = { { 0.0f, 0.0f, 0.0f }, 1.0f }; b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateSphereShape( bodyId, &shapeDef, &sphere ); // Body sphere at world (5,0,0), ray straight at it along +X. b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyCastResult result = b3Body_CastRay( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, bodyTransform ); ENSURE( result.hit ); ENSURE( b3Shape_IsValid( result.shapeId ) ); ENSURE_SMALL( result.fraction - 0.4f, 1e-5f ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-5f ); ENSURE_SMALL( result.normal.y, 1e-5f ); ENSURE_SMALL( result.normal.z, 1e-5f ); b3Vec3 point = b3ToVec3( result.point ); ENSURE_SMALL( point.x - 4.0f, 1e-4f ); ENSURE_SMALL( point.y, 1e-4f ); ENSURE_SMALL( point.z, 1e-4f ); b3DestroyWorld( worldId ); return 0; } static int CastRayMiss( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3Sphere sphere = { { 0.0f, 0.0f, 0.0f }, 1.0f }; b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateSphereShape( bodyId, &shapeDef, &sphere ); // Ray runs parallel to the body, never reaching it. b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyCastResult result = b3Body_CastRay( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, (b3Vec3){ 0.0f, 10.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, bodyTransform ); ENSURE( result.hit == false ); b3DestroyWorld( worldId ); return 0; } static int CastRayClosestShape( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3Sphere nearSphere = { { 0.0f, 0.0f, 0.0f }, 1.0f }; b3Sphere farSphere = { { 4.0f, 0.0f, 0.0f }, 1.0f }; b3ShapeId nearId = b3CreateSphereShape( bodyId, &shapeDef, &nearSphere ); b3CreateSphereShape( bodyId, &shapeDef, &farSphere ); // Ray crosses both spheres; the loop must shrink maxFraction to the nearer hit. b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); b3BodyCastResult result = b3Body_CastRay( bodyId, (b3Pos){ -5.0f, 0.0f, 0.0f }, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, bodyTransform ); ENSURE( result.hit ); ENSURE( result.shapeId.index1 == nearId.index1 ); ENSURE( result.shapeId.generation == nearId.generation ); ENSURE_SMALL( result.fraction - 0.4f, 1e-5f ); b3DestroyWorld( worldId ); return 0; } static int CastRayRotatedBody( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); // Local center (0,2,0) rotated +90 deg about Z lands at world (-2,0,0). b3Sphere sphere = { { 0.0f, 2.0f, 0.0f }, 0.5f }; b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateSphereShape( bodyId, &shapeDef, &sphere ); b3WorldTransform bodyTransform = { .p = (b3Pos){ 0.0f, 0.0f, 0.0f }, .q = b3MakeQuatFromAxisAngle( (b3Vec3){ 0.0f, 0.0f, 1.0f }, 0.5f * B3_PI ), }; b3BodyCastResult result = b3Body_CastRay( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, (b3Vec3){ -4.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, bodyTransform ); ENSURE( result.hit ); ENSURE_SMALL( result.fraction - 0.375f, 1e-5f ); ENSURE_SMALL( result.normal.x - 1.0f, 1e-5f ); b3Vec3 point = b3ToVec3( result.point ); ENSURE_SMALL( point.x + 1.5f, 1e-4f ); b3DestroyWorld( worldId ); return 0; } static int CastRayFarFromOrigin( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3Sphere sphere = { { 0.0f, 0.0f, 0.0f }, 1.0f }; b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateSphereShape( bodyId, &shapeDef, &sphere ); // Same geometry as CastRayHitsSphere shifted far from the world origin. The relative framing // keeps the subtraction exact, so fraction and normal must be unchanged. b3Pos origin = { 1.0e6f, -2.0e6f, 5.0e5f }; b3WorldTransform bodyTransform = { .p = b3OffsetPos( origin, (b3Vec3){ 5.0f, 0.0f, 0.0f } ), .q = b3Quat_identity }; b3BodyCastResult result = b3Body_CastRay( bodyId, origin, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, bodyTransform ); ENSURE( result.hit ); ENSURE_SMALL( result.fraction - 0.4f, 1e-5f ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-5f ); ENSURE_SMALL( result.normal.y, 1e-5f ); ENSURE_SMALL( result.normal.z, 1e-5f ); b3DestroyWorld( worldId ); return 0; } // CastShape -------------------------------------------------------------------------------- static int CastShapeHitsBox( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Sphere proxy of radius 0.5 cast along +X into a box whose front face is at world x = 4. b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyCastResult result = b3Body_CastShape( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, &proxy, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, false, bodyTransform ); // Front face at world x = 4. The fraction carries a small shape-cast skin, the contact point // and normal do not. ENSURE( result.hit ); ENSURE( b3Shape_IsValid( result.shapeId ) ); ENSURE_SMALL( result.fraction - 0.35f, 1e-2f ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-4f ); b3Vec3 hit = b3ToVec3( result.point ); ENSURE_SMALL( hit.x - 4.0f, 1e-3f ); b3DestroyWorld( worldId ); return 0; } static int CastShapeMiss( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyCastResult result = b3Body_CastShape( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, &proxy, (b3Vec3){ 0.0f, 10.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, false, bodyTransform ); ENSURE( result.hit == false ); b3DestroyWorld( worldId ); return 0; } static int CastShapeRotatedBody( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); // Body sphere local center (0,2,0) rotated +90 deg about Z lands at world (-2,0,0). b3Sphere sphere = { { 0.0f, 2.0f, 0.0f }, 1.0f }; b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateSphereShape( bodyId, &shapeDef, &sphere ); b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = { .p = (b3Pos){ 0.0f, 0.0f, 0.0f }, .q = b3MakeQuatFromAxisAngle( (b3Vec3){ 0.0f, 0.0f, 1.0f }, 0.5f * B3_PI ), }; b3BodyCastResult result = b3Body_CastShape( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, &proxy, (b3Vec3){ -4.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, false, bodyTransform ); ENSURE( result.hit ); ENSURE_SMALL( result.fraction - 0.125f, 1e-2f ); ENSURE_SMALL( result.normal.x - 1.0f, 1e-4f ); b3Vec3 hit = b3ToVec3( result.point ); ENSURE_SMALL( hit.x + 1.0f, 1e-3f ); b3DestroyWorld( worldId ); return 0; } static int CastShapeFarFromOrigin( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3Pos origin = { 1.0e6f, -2.0e6f, 5.0e5f }; b3WorldTransform bodyTransform = { .p = b3OffsetPos( origin, (b3Vec3){ 5.0f, 0.0f, 0.0f } ), .q = b3Quat_identity }; b3BodyCastResult result = b3Body_CastShape( bodyId, origin, &proxy, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), 1.0f, false, bodyTransform ); ENSURE( result.hit ); ENSURE_SMALL( result.fraction - 0.35f, 1e-2f ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-4f ); b3DestroyWorld( worldId ); return 0; } // OverlapShape ----------------------------------------------------------------------------- static int OverlapTrue( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Proxy sits at the box center. b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); bool overlaps = b3Body_OverlapShape( bodyId, (b3Pos){ 5.0f, 0.0f, 0.0f }, &proxy, b3DefaultQueryFilter(), bodyTransform ); ENSURE( overlaps ); b3DestroyWorld( worldId ); return 0; } static int OverlapFalse( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); bool overlaps = b3Body_OverlapShape( bodyId, (b3Pos){ 20.0f, 0.0f, 0.0f }, &proxy, b3DefaultQueryFilter(), bodyTransform ); ENSURE( overlaps == false ); b3DestroyWorld( worldId ); return 0; } static int OverlapRespectsBodyTransform( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Fixed proxy and origin: only the supplied transform decides the overlap. b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3Pos origin = { 0.0f, 0.0f, 0.0f }; ENSURE( b3Body_OverlapShape( bodyId, origin, &proxy, b3DefaultQueryFilter(), IdentityAt( 0.0f, 0.0f, 0.0f ) ) ); ENSURE( b3Body_OverlapShape( bodyId, origin, &proxy, b3DefaultQueryFilter(), IdentityAt( 20.0f, 0.0f, 0.0f ) ) == false ); b3DestroyWorld( worldId ); return 0; } static int OverlapFilter( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Vec3 point = { 0.0f, 0.0f, 0.0f }; b3ShapeProxy proxy = { &point, 1, 0.5f }; b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); // Geometry overlaps, but a zero mask rejects every category. b3QueryFilter filter = b3DefaultQueryFilter(); filter.maskBits = 0; bool overlaps = b3Body_OverlapShape( bodyId, (b3Pos){ 0.0f, 0.0f, 0.0f }, &proxy, filter, bodyTransform ); ENSURE( overlaps == false ); b3DestroyWorld( worldId ); return 0; } static bool CountOverlapCallback( b3ShapeId shapeId, void* context ) { (void)shapeId; *(int*)context += 1; return true; } // A baked compound keeps its tree and its child placements in the compound frame while the query // proxy is in world space, so a compound on a turned body only answers correctly if the proxy is // brought back into that frame first. static int OverlapCompoundRotatedBody( void ) { b3WorldDef worldDef = b3DefaultWorldDef(); b3WorldId worldId = b3CreateWorld( &worldDef ); b3SurfaceMaterial mat = b3DefaultSurfaceMaterial(); b3CompoundSphereDef spheres[2] = { { .sphere = { { -3.0f, 0.0f, 0.0f }, 0.5f }, .material = mat }, { .sphere = { { 3.0f, 0.0f, 0.0f }, 0.5f }, .material = mat }, }; b3CompoundDef compoundDef = { .spheres = spheres, .sphereCount = 2 }; b3CompoundData* compound = b3CreateCompound( &compoundDef ); ENSURE( compound != NULL ); b3Transform pose = { .p = { 10.0f, 20.0f, 30.0f }, .q = b3MakeQuatFromAxisAngle( b3Vec3_axisZ, 0.5f * B3_PI ) }; b3BodyDef bodyDef = b3DefaultBodyDef(); bodyDef.type = b3_staticBody; bodyDef.position = (b3Pos){ pose.p.x, pose.p.y, pose.p.z }; bodyDef.rotation = pose.q; b3BodyId bodyId = b3CreateBody( worldId, &bodyDef ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateBakedCompoundShape( bodyId, &shapeDef, compound ); b3QueryFilter filter = b3DefaultQueryFilter(); // Sitting on the second child, which the body pose has swung onto the +Y side b3Vec3 onChild = b3TransformPoint( pose, (b3Vec3){ 3.0f, 0.0f, 0.0f } ); b3ShapeProxy hitProxy = { &onChild, 1, 0.1f }; int hits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &hitProxy, filter, CountOverlapCallback, &hits ); ENSURE( hits == 1 ); b3WorldTransform bodyTransform = { .p = bodyDef.position, .q = bodyDef.rotation }; ENSURE( b3Body_OverlapShape( bodyId, b3Pos_zero, &hitProxy, filter, bodyTransform ) ); // The gap between the two children stays empty b3Vec3 inGap = b3TransformPoint( pose, (b3Vec3){ 0.0f, 0.0f, 0.0f } ); b3ShapeProxy gapProxy = { &inGap, 1, 0.25f }; hits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &gapProxy, filter, CountOverlapCallback, &hits ); ENSURE( hits == 0 ); ENSURE( b3Body_OverlapShape( bodyId, b3Pos_zero, &gapProxy, filter, bodyTransform ) == false ); b3DestroyWorld( worldId ); b3DestroyCompound( compound ); return 0; } // A box hull proxy built around a world target with a zero origin must hit the same shapes as the // same box built at the local origin and queried with the target as origin. This is the origin // relative equivalence the world query promises, and the pattern users reach for when they bake a // query box with b3MakeTransformedBoxHull. static int OverlapHullProxyEquivalence( void ) { b3WorldDef worldDef = b3DefaultWorldDef(); b3WorldId worldId = b3CreateWorld( &worldDef ); b3BodyDef bodyDef = b3DefaultBodyDef(); bodyDef.type = b3_staticBody; bodyDef.position = (b3Pos){ 10.0f, 0.0f, 0.0f }; b3BodyId bodyId = b3CreateBody( worldId, &bodyDef ); b3BoxHull box = b3MakeBoxHull( 1.0f, 1.0f, 1.0f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3World_Step( worldId, 1.0f / 60.0f, 1 ); b3QueryFilter filter = b3DefaultQueryFilter(); // Overlapping target: a 10 wide query box centered on the body. { b3Vec3 offset = { 10.0f, 0.0f, 0.0f }; b3BoxHull baked = b3MakeTransformedBoxHull( 5.0f, 5.0f, 5.0f, (b3Transform){ offset, b3Quat_identity } ); b3ShapeProxy bakedProxy = { baked.boxPoints, baked.base.vertexCount, 0.0f }; int bakedHits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &bakedProxy, filter, CountOverlapCallback, &bakedHits ); b3Pos origin = b3OffsetPos( b3Pos_zero, offset ); b3BoxHull local = b3MakeBoxHull( 5.0f, 5.0f, 5.0f ); b3ShapeProxy localProxy = { local.boxPoints, local.base.vertexCount, 0.0f }; int localHits = 0; b3World_OverlapShape( worldId, origin, &localProxy, filter, CountOverlapCallback, &localHits ); ENSURE( bakedHits == 1 ); ENSURE( localHits == bakedHits ); } // Clearing target: same box far from the body, both formulations agree on the miss. { b3Vec3 offset = { 100.0f, 0.0f, 0.0f }; b3BoxHull baked = b3MakeTransformedBoxHull( 5.0f, 5.0f, 5.0f, (b3Transform){ offset, b3Quat_identity } ); b3ShapeProxy bakedProxy = { baked.boxPoints, baked.base.vertexCount, 0.0f }; int bakedHits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &bakedProxy, filter, CountOverlapCallback, &bakedHits ); b3Pos origin = b3OffsetPos( b3Pos_zero, offset ); b3BoxHull local = b3MakeBoxHull( 5.0f, 5.0f, 5.0f ); b3ShapeProxy localProxy = { local.boxPoints, local.base.vertexCount, 0.0f }; int localHits = 0; b3World_OverlapShape( worldId, origin, &localProxy, filter, CountOverlapCallback, &localHits ); ENSURE( bakedHits == 0 ); ENSURE( localHits == bakedHits ); } b3DestroyWorld( worldId ); return 0; } // A quarter turn baked into the query hull must reach the overlap test. A long thin bar hits a body // off the origin when aligned along X and clears it once rotated to lie along Z. static int OverlapHullProxyRotation( void ) { b3WorldDef worldDef = b3DefaultWorldDef(); b3WorldId worldId = b3CreateWorld( &worldDef ); b3BodyDef bodyDef = b3DefaultBodyDef(); bodyDef.type = b3_staticBody; bodyDef.position = (b3Pos){ 3.0f, 0.0f, 0.0f }; b3BodyId bodyId = b3CreateBody( worldId, &bodyDef ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3World_Step( worldId, 1.0f / 60.0f, 1 ); b3QueryFilter filter = b3DefaultQueryFilter(); // Bar long in local X, centered at the origin, reaches the body at x = 3. b3BoxHull aligned = b3MakeTransformedBoxHull( 4.0f, 0.3f, 0.3f, b3Transform_identity ); b3ShapeProxy alignedProxy = { aligned.boxPoints, aligned.base.vertexCount, 0.0f }; int alignedHits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &alignedProxy, filter, CountOverlapCallback, &alignedHits ); ENSURE( alignedHits == 1 ); // Rotated a quarter turn about Y the long axis points along Z, so the bar no longer reaches x = 3. b3Quat q = b3MakeQuatFromAxisAngle( (b3Vec3){ 0.0f, 1.0f, 0.0f }, 0.5f * B3_PI ); b3BoxHull turned = b3MakeTransformedBoxHull( 4.0f, 0.3f, 0.3f, (b3Transform){ b3Vec3_zero, q } ); b3ShapeProxy turnedProxy = { turned.boxPoints, turned.base.vertexCount, 0.0f }; int turnedHits = 0; b3World_OverlapShape( worldId, b3Pos_zero, &turnedProxy, filter, CountOverlapCallback, &turnedHits ); ENSURE( turnedHits == 0 ); b3DestroyWorld( worldId ); return 0; } // CollideMover ----------------------------------------------------------------------------- static int MoverTouchesBox( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Mover core runs above the +Y face; its 0.2 radius reaches 0.1 into it. b3Capsule mover = { { -0.3f, 0.6f, 0.0f }, { 0.3f, 0.6f, 0.0f }, 0.2f }; b3BodyPlaneResult planes[4]; b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); int count = b3Body_CollideMover( bodyId, planes, 4, (b3Pos){ 0.0f, 0.0f, 0.0f }, &mover, b3DefaultQueryFilter(), bodyTransform ); ENSURE( count == 1 ); ENSURE( b3Shape_IsValid( planes[0].shapeId ) ); ENSURE( b3IsNormalized( planes[0].result.plane.normal ) ); ENSURE( planes[0].result.plane.normal.y > 0.99f ); ENSURE_SMALL( planes[0].result.plane.offset - 0.1f, 1e-4f ); b3DestroyWorld( worldId ); return 0; } static int MoverSeparated( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Capsule mover = { { -0.3f, 5.0f, 0.0f }, { 0.3f, 5.0f, 0.0f }, 0.2f }; b3BodyPlaneResult planes[4]; b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); int count = b3Body_CollideMover( bodyId, planes, 4, (b3Pos){ 0.0f, 0.0f, 0.0f }, &mover, b3DefaultQueryFilter(), bodyTransform ); ENSURE( count == 0 ); b3DestroyWorld( worldId ); return 0; } static int MoverRotatedBody( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Rotating +90 deg about X turns the local +Y face toward world +Z. The mover sits above the // world +Z face, so the returned normal must come back rotated into world space. b3Capsule mover = { { -0.3f, 0.0f, 0.6f }, { 0.3f, 0.0f, 0.6f }, 0.2f }; b3BodyPlaneResult planes[4]; b3WorldTransform bodyTransform = { .p = (b3Pos){ 0.0f, 0.0f, 0.0f }, .q = b3MakeQuatFromAxisAngle( (b3Vec3){ 1.0f, 0.0f, 0.0f }, 0.5f * B3_PI ), }; int count = b3Body_CollideMover( bodyId, planes, 4, (b3Pos){ 0.0f, 0.0f, 0.0f }, &mover, b3DefaultQueryFilter(), bodyTransform ); ENSURE( count == 1 ); ENSURE( b3IsNormalized( planes[0].result.plane.normal ) ); ENSURE( planes[0].result.plane.normal.z > 0.99f ); ENSURE_SMALL( planes[0].result.plane.offset - 0.1f, 1e-4f ); b3DestroyWorld( worldId ); return 0; } static int MoverCapacity( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); // Two spheres each touch a mover that runs between them along X at y = 0. b3ShapeDef shapeDef = b3DefaultShapeDef(); b3Sphere left = { { -0.4f, 0.6f, 0.0f }, 0.5f }; b3Sphere right = { { 0.4f, 0.6f, 0.0f }, 0.5f }; b3CreateSphereShape( bodyId, &shapeDef, &left ); b3CreateSphereShape( bodyId, &shapeDef, &right ); b3Capsule mover = { { -1.0f, 0.0f, 0.0f }, { 1.0f, 0.0f, 0.0f }, 0.2f }; b3BodyPlaneResult planes[4]; b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); // Capacity caps the result and prevents writing past the buffer. int capped = b3Body_CollideMover( bodyId, planes, 1, (b3Pos){ 0.0f, 0.0f, 0.0f }, &mover, b3DefaultQueryFilter(), bodyTransform ); ENSURE( capped == 1 ); int full = b3Body_CollideMover( bodyId, planes, 4, (b3Pos){ 0.0f, 0.0f, 0.0f }, &mover, b3DefaultQueryFilter(), bodyTransform ); ENSURE( full == 2 ); b3DestroyWorld( worldId ); return 0; } // TimeOfImpactMover ------------------------------------------------------------------------ // The mover capsule is expressed in the query frame, so a core segment starting at the origin // stands the character on the query point. Targets sit on the sweep line at y = 0. static b3Capsule MakeStandingMover( void ) { return (b3Capsule){ { 0.0f, 0.0f, 0.0f }, { 0.0f, 1.0f, 0.0f }, 0.25f }; } static int MoverTOIHitsBox( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3ShapeId shapeId = b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Face at x = 4.5, mover radius 0.25, so 4.25 of the 10 unit sweep is free. b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 0.425f, 1e-2f ); ENSURE( b3IsNormalized( result.normal ) ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-3f ); // The result carries a shape id, so the hit shape must come back identified. ENSURE( b3Shape_IsValid( result.shapeId ) ); ENSURE( result.shapeId.index1 == shapeId.index1 ); ENSURE( result.shapeId.generation == shapeId.generation ); b3DestroyWorld( worldId ); return 0; } static int MoverTOISeparated( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Sweeping along +Y holds the X gap at 4.25 for the whole interval. b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 0.0f, 10.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 1.0f, 1e-6f ); ENSURE( b3Shape_IsValid( result.shapeId ) == false ); b3DestroyWorld( worldId ); return 0; } static int MoverTOIOverlapped( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Mover starts buried in the box, so there is no free interval to search. b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); // Overlap should be ignored. ENSURE_SMALL( result.fraction - 1.0f, 1e-6f ); ENSURE( B3_IS_NULL(result.shapeId) ); b3DestroyWorld( worldId ); return 0; } // Two shapes on the sweep line must resolve to the nearer one whatever order the shape list // hands them to the loop. Shapes are pushed on the head of the list, so the two bodies below // walk their shapes in opposite orders. static int MoverTOIClosestShape( void ) { b3BodyId nearFirstId; b3WorldId worldId = CreateQueryWorld( &nearFirstId ); b3BodyDef bodyDef = b3DefaultBodyDef(); b3BodyId nearLastId = b3CreateBody( worldId, &bodyDef ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3Sphere nearSphere = { { 5.0f, 0.0f, 0.0f }, 0.5f }; b3Sphere farSphere = { { 9.0f, 0.0f, 0.0f }, 0.5f }; b3ShapeId nearFirstHit = b3CreateSphereShape( nearFirstId, &shapeDef, &nearSphere ); b3CreateSphereShape( nearFirstId, &shapeDef, &farSphere ); b3CreateSphereShape( nearLastId, &shapeDef, &farSphere ); b3ShapeId nearLastHit = b3CreateSphereShape( nearLastId, &shapeDef, &nearSphere ); b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); b3Vec3 translation = { 10.0f, 0.0f, 0.0f }; b3BodyTOIResult nearFirst = b3Body_TimeOfImpactMover( nearFirstId, b3Pos_zero, &mover, translation, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); b3BodyTOIResult nearLast = b3Body_TimeOfImpactMover( nearLastId, b3Pos_zero, &mover, translation, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( nearFirst.fraction - 0.425f, 1e-2f ); ENSURE( nearFirst.shapeId.index1 == nearFirstHit.index1 ); ENSURE_SMALL( nearLast.fraction - nearFirst.fraction, 1e-4f ); ENSURE( nearLast.shapeId.index1 == nearLastHit.index1 ); b3DestroyWorld( worldId ); return 0; } // A shape the sweep clears must not erase a hit found earlier in the list. The off path sphere // is created first so the list hands it over last. static int MoverTOIKeepsHitAfterMiss( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3Sphere offPath = { { 5.0f, 0.0f, 20.0f }, 0.5f }; b3Sphere onPath = { { 5.0f, 0.0f, 0.0f }, 0.5f }; b3CreateSphereShape( bodyId, &shapeDef, &offPath ); b3ShapeId onPathId = b3CreateSphereShape( bodyId, &shapeDef, &onPath ); b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 0.425f, 1e-2f ); ENSURE( result.shapeId.index1 == onPathId.index1 ); b3DestroyWorld( worldId ); return 0; } // The mover capsule points live in the query frame, so sliding both the mover and the body by // the same offset must not move the impact. static int MoverTOIMoverOffset( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Vec3 translation = { 10.0f, 0.0f, 0.0f }; b3QueryFilter filter = b3DefaultQueryFilter(); b3Capsule atOrigin = MakeStandingMover(); b3WorldTransform transformA = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyTOIResult resultA = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &atOrigin, translation, filter, transformA, transformA ); b3Capsule offset = { { 2.0f, 0.0f, 0.0f }, { 2.0f, 1.0f, 0.0f }, 0.25f }; b3WorldTransform transformB = IdentityAt( 7.0f, 0.0f, 0.0f ); b3BodyTOIResult resultB = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &offset, translation, filter, transformB, transformB ); ENSURE_SMALL( resultB.fraction - resultA.fraction, 1e-4f ); ENSURE_SMALL( resultB.point.x - resultA.point.x - 2.0f, 1e-3f ); b3DestroyWorld( worldId ); return 0; } // The body sweeps between the two supplied transforms. A bar spinning a quarter turn about Y // reaches a mover that its start pose clears. static int MoverTOIRotatingBody( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull bar = b3MakeBoxHull( 2.0f, 0.25f, 0.25f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &bar.base ); // Query origin puts the mover at world (0,0,2.1), just inside the swept end of the bar. b3Pos origin = { 0.0f, 0.0f, 2.1f }; b3Capsule mover = MakeStandingMover(); b3WorldTransform transform1 = IdentityAt( 0.0f, 0.0f, 0.0f ); b3WorldTransform transform2 = { .p = (b3Pos){ 0.0f, 0.0f, 0.0f }, .q = b3MakeQuatFromAxisAngle( (b3Vec3){ 0.0f, 1.0f, 0.0f }, 0.5f * B3_PI ), }; b3BodyTOIResult spinning = b3Body_TimeOfImpactMover( bodyId, origin, &mover, b3Vec3_zero, b3DefaultQueryFilter(), transform1, transform2 ); ENSURE( 0.0f < spinning.fraction && spinning.fraction < 1.0f ); // Holding the start pose leaves the bar along X and well clear. b3BodyTOIResult still = b3Body_TimeOfImpactMover( bodyId, origin, &mover, b3Vec3_zero, b3DefaultQueryFilter(), transform1, transform1 ); ENSURE_SMALL( still.fraction - 1.0f, 1e-6f ); ENSURE( B3_IS_NULL( still.shapeId ) ); b3DestroyWorld( worldId ); return 0; } // Everything is re-centered on the origin, so a huge origin must not shift the fraction and the // hit point comes back in the origin frame. static int MoverTOIFarFromOrigin( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); b3Pos origin = { 1.0e6f, -2.0e6f, 5.0e5f }; b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = { .p = b3OffsetPos( origin, (b3Vec3){ 5.0f, 0.0f, 0.0f } ), .q = b3Quat_identity }; b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, origin, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 0.425f, 1e-2f ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-3f ); ENSURE_SMALL( (result.point.x - origin.x) - 4.4f, 0.5f ); b3DestroyWorld( worldId ); return 0; } static int MoverTOIFilter( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull box = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3CreateHullShape( bodyId, &shapeDef, &box.base ); // Geometry is on the sweep line, but a zero mask rejects every category. b3Capsule mover = MakeStandingMover(); b3QueryFilter filter = b3DefaultQueryFilter(); filter.maskBits = 0; b3WorldTransform bodyTransform = IdentityAt( 5.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, filter, bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 1.0f, 1e-6f ); b3DestroyWorld( worldId ); return 0; } // A shape the mover starts inside is skipped, but the sweep still runs against the other shapes // on the body. static int MoverTOIOverlapSkipsShape( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3BoxHull buried = b3MakeBoxHull( 0.5f, 0.5f, 0.5f ); b3CreateHullShape( bodyId, &shapeDef, &buried.base ); // Face at x = 4.5 like MoverTOIHitsBox b3BoxHull onPath = b3MakeOffsetBoxHull( 0.5f, 0.5f, 0.5f, (b3Vec3){ 5.0f, 0.0f, 0.0f } ); b3ShapeId onPathId = b3CreateHullShape( bodyId, &shapeDef, &onPath.base ); b3Capsule mover = MakeStandingMover(); b3WorldTransform bodyTransform = IdentityAt( 0.0f, 0.0f, 0.0f ); b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, b3Pos_zero, &mover, (b3Vec3){ 10.0f, 0.0f, 0.0f }, b3DefaultQueryFilter(), bodyTransform, bodyTransform ); ENSURE_SMALL( result.fraction - 0.425f, 1e-2f ); ENSURE( result.shapeId.index1 == onPathId.index1 ); ENSURE_SMALL( result.normal.x + 1.0f, 1e-3f ); b3DestroyWorld( worldId ); return 0; } static float RandomFloat( uint32_t* seed, float lower, float upper ) { uint32_t x = *seed; x ^= x << 13; x ^= x >> 17; x ^= x << 5; *seed = x; float unit = (float)( x >> 8 ) / 16777216.0f; return lower + ( upper - lower ) * unit; } static b3Vec3 RandomVector( uint32_t* seed, float lower, float upper ) { b3Vec3 v; v.x = RandomFloat( seed, lower, upper ); v.y = RandomFloat( seed, lower, upper ); v.z = RandomFloat( seed, lower, upper ); return v; } static b3Vec3 RandomDirection( uint32_t* seed ) { for ( ;; ) { b3Vec3 v = RandomVector( seed, -1.0f, 1.0f ); float length = b3Length( v ); if ( 0.1f < length && length < 1.0f ) { return b3MulSV( 1.0f / length, v ); } } } // The mover sweep follows the solver's continuous rule: any time of impact strictly inside the // sweep counts, whatever the root finder reports. A capsule pivoting around a hull vertex can // exhaust the iteration cap, and that must not read as a clean miss. Compare against the raw // sweep built from the same inputs. static int MoverTOIMatchesSweep( void ) { b3BodyId bodyId; b3WorldId worldId = CreateQueryWorld( &bodyId ); b3BoxHull bar = b3MakeBoxHull( 2.0f, 0.25f, 0.25f ); b3ShapeDef shapeDef = b3DefaultShapeDef(); b3ShapeId shapeId = b3CreateHullShape( bodyId, &shapeDef, &bar.base ); uint32_t seed = 0x9E3779B9u; int hitCount = 0; for ( int i = 0; i < 2000; ++i ) { b3Capsule mover; mover.center1 = RandomVector( &seed, -0.2f, 0.2f ); mover.center2 = b3MulAdd( mover.center1, RandomFloat( &seed, 0.05f, 1.5f ), RandomDirection( &seed ) ); mover.radius = RandomFloat( &seed, 0.05f, 0.5f ); b3Vec3 capsulePoints[2] = { mover.center1, mover.center2 }; b3Vec3 o = RandomVector( &seed, -3.5f, 3.5f ); b3Pos origin = { o.x, o.y, o.z }; b3Vec3 translation = b3MulSV( RandomFloat( &seed, 0.0f, 3.0f ), RandomDirection( &seed ) ); b3WorldTransform transform1 = { .p = b3Pos_zero, .q = b3MakeQuatFromAxisAngle( RandomDirection( &seed ), RandomFloat( &seed, 0.0f, B3_PI ) ), }; b3Quat spin = b3MakeQuatFromAxisAngle( RandomDirection( &seed ), RandomFloat( &seed, 0.001f, B3_PI ) ); b3Vec3 shift = RandomVector( &seed, -1.0f, 1.0f ); b3WorldTransform transform2 = { .p = (b3Pos){ shift.x, shift.y, shift.z }, .q = b3MulQuat( spin, transform1.q ), }; b3BodyTOIResult result = b3Body_TimeOfImpactMover( bodyId, origin, &mover, translation, b3DefaultQueryFilter(), transform1, transform2 ); // Same sweep the body query builds. The static body keeps its center at the body origin. b3Transform xf1 = b3ToRelativeTransform( transform1, origin ); b3Transform xf2 = b3ToRelativeTransform( transform2, origin ); b3TOIInput input = { 0 }; input.proxyA = (b3ShapeProxy){ b3GetHullPoints( &bar.base ), bar.base.vertexCount, 0.0f }; input.proxyB = (b3ShapeProxy){ capsulePoints, 2, mover.radius }; input.sweepA.c1 = xf1.p; input.sweepA.c2 = xf2.p; input.sweepA.q1 = transform1.q; input.sweepA.q2 = transform2.q; input.sweepA.localCenter = b3Vec3_zero; input.sweepB.c1 = b3Vec3_zero; input.sweepB.c2 = translation; input.sweepB.q1 = b3Quat_identity; input.sweepB.q2 = b3Quat_identity; input.sweepB.localCenter = b3Vec3_zero; input.maxFraction = 1.0f; b3TOIOutput raw = b3TimeOfImpact( &input ); if ( 0.0f < raw.fraction && raw.fraction < 1.0f ) { ENSURE_SMALL( result.fraction - raw.fraction, 1e-6f ); ENSURE( result.shapeId.index1 == shapeId.index1 ); ENSURE( b3IsNormalized( result.normal ) ); ENSURE_SMALL( b3Distance( b3SubPos( result.point, origin ), raw.point ), 1e-4f ); hitCount += 1; } else { ENSURE_SMALL( result.fraction - 1.0f, 1e-6f ); ENSURE( B3_IS_NULL( result.shapeId ) ); } } ENSURE( hitCount > 0 ); b3DestroyWorld( worldId ); return 0; } int BodyQueryTest( void ) { RUN_SUBTEST( CastRayHitsSphere ); RUN_SUBTEST( CastRayMiss ); RUN_SUBTEST( CastRayClosestShape ); RUN_SUBTEST( CastRayRotatedBody ); RUN_SUBTEST( CastRayFarFromOrigin ); RUN_SUBTEST( CastShapeHitsBox ); RUN_SUBTEST( CastShapeMiss ); RUN_SUBTEST( CastShapeRotatedBody ); RUN_SUBTEST( CastShapeFarFromOrigin ); RUN_SUBTEST( OverlapTrue ); RUN_SUBTEST( OverlapFalse ); RUN_SUBTEST( OverlapRespectsBodyTransform ); RUN_SUBTEST( OverlapFilter ); RUN_SUBTEST( OverlapHullProxyEquivalence ); RUN_SUBTEST( OverlapHullProxyRotation ); RUN_SUBTEST( OverlapCompoundRotatedBody ); RUN_SUBTEST( MoverTouchesBox ); RUN_SUBTEST( MoverSeparated ); RUN_SUBTEST( MoverRotatedBody ); RUN_SUBTEST( MoverCapacity ); RUN_SUBTEST( MoverTOIHitsBox ); RUN_SUBTEST( MoverTOISeparated ); RUN_SUBTEST( MoverTOIOverlapped ); RUN_SUBTEST( MoverTOIClosestShape ); RUN_SUBTEST( MoverTOIKeepsHitAfterMiss ); RUN_SUBTEST( MoverTOIMoverOffset ); RUN_SUBTEST( MoverTOIRotatingBody ); RUN_SUBTEST( MoverTOIFarFromOrigin ); RUN_SUBTEST( MoverTOIFilter ); RUN_SUBTEST( MoverTOIOverlapSkipsShape ); RUN_SUBTEST( MoverTOIMatchesSweep ); return 0; }