Tests: closing-noise drops /g/ (not a stop in TryIpaDescriptor); velar seal bound -15.5 so it is the binding guard

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
Aqua 2026-11-13 22:53:58 +00:00
commit 7a72915d14
2 changed files with 3 additions and 4 deletions

View file

@ -50,14 +50,13 @@ public sealed class StopClosureAndControlRenderTests(ITestOutputHelper output)
// fill that band (/d/ read -11.6 dB with the source on and -52.8 with it off; with the source on it swings between -13.5 and -9.3 dB
// with f0 alone, 139.5 to 145 Hz, as the harmonics fall on and off the 100 Hz grid), so with the source on the measure cannot tell the
// voicing from the hiss. Source off, the burst gain held through the closure read +5 dB (/p/) and +14 dB (/t/, /d/) on 3b62b9c; gated,
// every stop reads -52 dB. -30 is the bound between the two. /g/ has no burst gain to hold (the gate mutant leaves it at -52 dB); it is here as a stop that must stay quiet.
// every stop reads -52 dB. -30 is the bound between the two. /g/ is not here: it is not in TryIpaDescriptor, so it would render the default approximant and could not fail.
[FaustTheory]
[InlineData("p")]
[InlineData("b")]
[InlineData("t")]
[InlineData("d")]
[InlineData("k")]
[InlineData("g")]
public void ClosingIntoAStopMakesNoHighFrequencyNoise(string ipa)
{
var parsed = PatchScript.Parse(Word(ipa));

View file

@ -389,7 +389,7 @@ public sealed class StressAndReleaseRenderTests(ITestOutputHelper output)
// source-off /k/ read -21.0 dB over .21 to .263 s with the ramp and -27.5 with the contact and the constriction stepped shut; main's
// 30 ms-later window read -25.7), and that decays within the first 25 ms.
// The test therefore proves its own measure first (a leak injected into the tongue's closed diameter must read 3 dB louder) and then bounds
// the sealed closure (-16.5 measured; the .02 leak reads -14.7).
// the sealed closure (-16.5 measured; a .005, .03 or .035 leak reads -15.1, a .02 leak -14.7).
[Fact]
public void AVelarStopClosureSealsAndTheMeasureSeesALeak()
{
@ -415,7 +415,7 @@ public sealed class StressAndReleaseRenderTests(ITestOutputHelper output)
output.WriteLine($"/k/ closure re vowels, source on, settled part: sealed {sealedClosure:F1} dB, with a 0.1 leak {leaking:F1} dB");
if (double.IsNaN(sealedClosure)) return;
Assert.True(leaking >= sealedClosure + 3, $"the measure sees a leak: sealed {sealedClosure:F1} dB, leaking {leaking:F1} dB");
Assert.True(sealedClosure <= -15, $"the /k/ closure seals: {sealedClosure:F1} dB re the vowels (a .02 leak reads about 1.8 dB louder than the measured -16.5)");
Assert.True(sealedClosure <= -15.5, $"the /k/ closure seals: {sealedClosure:F1} dB re the vowels (measured -16.5; leaks of .005 to .1 read -15.1 to -12.4, the measure is not monotonic in the leak, so the bound sits under the weakest of them)");
}
[Fact]