smoo_init keeps si.smoo's 22.7 ms time constant, steps from its input without rounding drift; pitch-ratio smoother starts at its input; dings regenerated
smoo_init used a 5 ms pole where si.smoo is 1 - 44.1/SR (22.7 ms): live control moved 4.5x faster. The step is now prev + (x - prev) * (1 - pole), so a constant control stays at its input to the bit. The source's own 10 ms pitch-ratio smoother (si.smooth, from 0) rounded to ~4e-5 off its input once the control stopped climbing, which put the 2744 Hz alias-test source 0.12 Hz flat and leaked its harmonics into the alias measurement (-30.3 dB, base -43.4, now -43.4); it is smoo_from at its input. The lowered dings gain the two definitions only; no ding control uses them. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
parent
3b62b9c9d4
commit
20aec42577
5 changed files with 17 additions and 3 deletions
|
|
@ -47,8 +47,12 @@ public static partial class FaustEmitter
|
|||
source.AppendLine("smooth01(x) = clip01(x) * clip01(x) * (3.0 - 2.0 * clip01(x));");
|
||||
// si.smoo starts every control at 0 and climbs to it: a word began with the tract shut, the vowel weights at 0 and the source off,
|
||||
// and the first ~100 ms of every render were that climb (the level rose 40 dB over the first 100 ms of an isolated vowel, and
|
||||
// the bandwidths fell from ~300 Hz to 90). This smoother starts at its input and smooths from there.
|
||||
source.AppendLine("smoo_init(x) = loop ~ _ with { pole = ba.tau2pole(0.005); loop(prev) = select2(1 - 1', prev * pole + x * (1.0 - pole), x); };");
|
||||
// the bandwidths fell from ~300 Hz to 90). smoo_from starts at its input and smooths from there. smoo_init is si.smoo's own
|
||||
// pole (1 - 44.1 / SR, a 22.7 ms time constant), so live control moves exactly as fast as before; only the start differs.
|
||||
// The step is written prev + (x - prev) * (1 - pole), not prev * pole + x * (1 - pole): a control that never moves then
|
||||
// stays at its input to the bit, where the other form rounds away from it by up to ~4e-5.
|
||||
source.AppendLine("smoo_from(pole, x) = loop ~ _ with { loop(prev) = select2(1 - 1', prev + (x - prev) * (1.0 - pole), x); };");
|
||||
source.AppendLine("smoo_init(x) = smoo_from(1.0 - 44.1 / ma.SR, x);");
|
||||
source.AppendLine("seg_smooth(t,t0,d,a,b) = a + (b - a) * smooth01((t - t0) / max(0.0001, d));");
|
||||
source.AppendLine("seg_exp(t,t0,d,a,b) = exp(log(max(0.00001, a)) + (log(max(0.00001, b)) - log(max(0.00001, a))) * clip01((t - t0) / max(0.0001, d)));");
|
||||
source.AppendLine("seg_curve(c,t,t0,d,a,b) = select2(c < 0.5, seg_exp(t,t0,d,a,b), seg(t,t0,d,a,b));");
|
||||
|
|
@ -743,7 +747,9 @@ public static partial class FaustEmitter
|
|||
var impedance = parameters.Expression(OwnerField(owner, "impedance"), port.Impedance);
|
||||
var flowScale = parameters.Expression(OwnerField(owner, "flow_scale"), port.FlowScale);
|
||||
// f0 is the voice frequency times the source's ratio (the stress cue), smoothed over 10 ms so a step in the ratio is a glide.
|
||||
var pitchRatio = $"({parameters.Expression(OwnerField(owner, "pitch_ratio"), port.PitchRatio)} : si.smooth(ba.tau2pole(0.01)))";
|
||||
// Its own 10 ms smoother also starts at its input: from 0 it glided the source's pitch up from nothing at the start of every word
|
||||
// (the control feeding it used to hide that under its own 100 ms climb) and rounded to a value up to ~4e-5 off its input.
|
||||
var pitchRatio = $"smoo_from(ba.tau2pole(0.01), {parameters.Expression(OwnerField(owner, "pitch_ratio"), port.PitchRatio)})";
|
||||
var load = $"{voiceName}_primitive_source_{safe}_load_pressure";
|
||||
var voiced = $"{voiceName}_primitive_source_{safe}_voiced";
|
||||
var flow = $"{voiceName}_primitive_source_{safe}_flow";
|
||||
|
|
|
|||
|
|
@ -16,6 +16,8 @@ seg(t,t0,d,a,b) = a + (b - a) * clip01((t - t0) / max(0.0001, d));
|
|||
bez(t,a,b,c,d) = (1.0 - t) * (1.0 - t) * (1.0 - t) * a + 3.0 * (1.0 - t) * (1.0 - t) * t * b + 3.0 * (1.0 - t) * t * t * c + t * t * t * d;
|
||||
seg_bez(t,t0,d,a,b,c,e) = bez(clip01((t - t0) / max(0.0001, d)), a, b, c, e);
|
||||
smooth01(x) = clip01(x) * clip01(x) * (3.0 - 2.0 * clip01(x));
|
||||
smoo_from(pole, x) = loop ~ _ with { loop(prev) = select2(1 - 1', prev + (x - prev) * (1.0 - pole), x); };
|
||||
smoo_init(x) = smoo_from(1.0 - 44.1 / ma.SR, x);
|
||||
seg_smooth(t,t0,d,a,b) = a + (b - a) * smooth01((t - t0) / max(0.0001, d));
|
||||
seg_exp(t,t0,d,a,b) = exp(log(max(0.00001, a)) + (log(max(0.00001, b)) - log(max(0.00001, a))) * clip01((t - t0) / max(0.0001, d)));
|
||||
seg_curve(c,t,t0,d,a,b) = select2(c < 0.5, seg_exp(t,t0,d,a,b), seg(t,t0,d,a,b));
|
||||
|
|
|
|||
|
|
@ -16,6 +16,8 @@ seg(t,t0,d,a,b) = a + (b - a) * clip01((t - t0) / max(0.0001, d));
|
|||
bez(t,a,b,c,d) = (1.0 - t) * (1.0 - t) * (1.0 - t) * a + 3.0 * (1.0 - t) * (1.0 - t) * t * b + 3.0 * (1.0 - t) * t * t * c + t * t * t * d;
|
||||
seg_bez(t,t0,d,a,b,c,e) = bez(clip01((t - t0) / max(0.0001, d)), a, b, c, e);
|
||||
smooth01(x) = clip01(x) * clip01(x) * (3.0 - 2.0 * clip01(x));
|
||||
smoo_from(pole, x) = loop ~ _ with { loop(prev) = select2(1 - 1', prev + (x - prev) * (1.0 - pole), x); };
|
||||
smoo_init(x) = smoo_from(1.0 - 44.1 / ma.SR, x);
|
||||
seg_smooth(t,t0,d,a,b) = a + (b - a) * smooth01((t - t0) / max(0.0001, d));
|
||||
seg_exp(t,t0,d,a,b) = exp(log(max(0.00001, a)) + (log(max(0.00001, b)) - log(max(0.00001, a))) * clip01((t - t0) / max(0.0001, d)));
|
||||
seg_curve(c,t,t0,d,a,b) = select2(c < 0.5, seg_exp(t,t0,d,a,b), seg(t,t0,d,a,b));
|
||||
|
|
|
|||
|
|
@ -16,6 +16,8 @@ seg(t,t0,d,a,b) = a + (b - a) * clip01((t - t0) / max(0.0001, d));
|
|||
bez(t,a,b,c,d) = (1.0 - t) * (1.0 - t) * (1.0 - t) * a + 3.0 * (1.0 - t) * (1.0 - t) * t * b + 3.0 * (1.0 - t) * t * t * c + t * t * t * d;
|
||||
seg_bez(t,t0,d,a,b,c,e) = bez(clip01((t - t0) / max(0.0001, d)), a, b, c, e);
|
||||
smooth01(x) = clip01(x) * clip01(x) * (3.0 - 2.0 * clip01(x));
|
||||
smoo_from(pole, x) = loop ~ _ with { loop(prev) = select2(1 - 1', prev + (x - prev) * (1.0 - pole), x); };
|
||||
smoo_init(x) = smoo_from(1.0 - 44.1 / ma.SR, x);
|
||||
seg_smooth(t,t0,d,a,b) = a + (b - a) * smooth01((t - t0) / max(0.0001, d));
|
||||
seg_exp(t,t0,d,a,b) = exp(log(max(0.00001, a)) + (log(max(0.00001, b)) - log(max(0.00001, a))) * clip01((t - t0) / max(0.0001, d)));
|
||||
seg_curve(c,t,t0,d,a,b) = select2(c < 0.5, seg_exp(t,t0,d,a,b), seg(t,t0,d,a,b));
|
||||
|
|
|
|||
|
|
@ -16,6 +16,8 @@ seg(t,t0,d,a,b) = a + (b - a) * clip01((t - t0) / max(0.0001, d));
|
|||
bez(t,a,b,c,d) = (1.0 - t) * (1.0 - t) * (1.0 - t) * a + 3.0 * (1.0 - t) * (1.0 - t) * t * b + 3.0 * (1.0 - t) * t * t * c + t * t * t * d;
|
||||
seg_bez(t,t0,d,a,b,c,e) = bez(clip01((t - t0) / max(0.0001, d)), a, b, c, e);
|
||||
smooth01(x) = clip01(x) * clip01(x) * (3.0 - 2.0 * clip01(x));
|
||||
smoo_from(pole, x) = loop ~ _ with { loop(prev) = select2(1 - 1', prev + (x - prev) * (1.0 - pole), x); };
|
||||
smoo_init(x) = smoo_from(1.0 - 44.1 / ma.SR, x);
|
||||
seg_smooth(t,t0,d,a,b) = a + (b - a) * smooth01((t - t0) / max(0.0001, d));
|
||||
seg_exp(t,t0,d,a,b) = exp(log(max(0.00001, a)) + (log(max(0.00001, b)) - log(max(0.00001, a))) * clip01((t - t0) / max(0.0001, d)));
|
||||
seg_curve(c,t,t0,d,a,b) = select2(c < 0.5, seg_exp(t,t0,d,a,b), seg(t,t0,d,a,b));
|
||||
|
|
|
|||
Loading…
Reference in a new issue